Skip Top nav bar link group topnav end piece go to business section go to education section go to history section go to gallery section go to news section go to organizations section go to research section go to search engine go to site index topnav end piece
NASA Meatball NASA Dryden Flight Research Pilots banner
Lifting body pilots - Jerry Gentry, John Manke, Bill Dana, Cecil Powell with M2-F3 in background Lifting body pilots - Jerry Gentry, John Manke, Bill Dana, Cecil Powell with M2-F3 in background

Photo Number: E-22901
Photo Date: 1971

Formats: 558x480 JPEG Image (80 KBytes)
1190x1024 JPEG Image (452 KBytes)
3030x2606 JPEG Image (3,792 KBytes)

Photo
Description:

Posing for this photo in front of the M2-F3 are (Left-Right) Air Force pilot Captain Jerauld Gentry, NASA pilots John Manke and William H. Dana. Kneeling is Air Force pilot Major Cecil Powell.

These four pilots flew the M2-F3 on a total of 27 flights between June 2, 1970 and December 20, 1972. The vehicle reached a maximum altitude of 71,500 feet and a maximum speed of Mach 1.613.

Dana joined the National Aeronautics and Space Administration's High-Speed Flight Station On October 1, 1958 (the birthday of NASA). As a research pilot, he was involved in some of the most significant aeronautical programs carried out at the Center. In the late 1960s and in the 1970s Dana was a project pilot on the lifting body program which flew several versions of the wingless vehicles and produced data that helped in development of the Space Shuttle. For his contributions to the lifting body program, Dana received the NASA Exceptional Service Medal. In 1976 he received the Haley Space Flight Award from the American Institute of Aeronautics and Astronautics for his research work on the M2-F3 lifting body control systems.

In 1993 Dana became Chief Engineer at NASA's Dryden Flight Research Center. He has authored several technical papers and is a member of The Society of Experimental Test Pilots. He retired on May 29, 1998.

John joined the National Aeronautics and Space Administration's Flight Research Center in 1962 as a research engineer and later became a research pilot, testing advanced craft such as the wingless lifting bodies, forerunners of the Space Shuttle. He was project pilot on the X-24B and also flew the HL-10, M2-F3, and X-24A lifting bodies. John made the first supersonic flight of a lifting body and the first landing of a lifting body on a hard surface runway.

Manke served as Director of the Flight Operations and Support Directorate at the Dryden Flight Research Center prior to its integration with Ames Research Center in October 1981. After this date John was named to head the joint Ames-Dryden Directorate of Flight Operations. He also served as site manager of the NASA Ames-Dryden Flight Research Facility.

John is a member of the Society of Experimental Test Pilots. He retired on April 27, 1984.


Project
Description:

A fleet of lifting bodies flown at the NASA Flight Research Center (FRC--later the Dryden Flight Research Center), Edwards, California, from 1963 to 1975 demonstrated the ability of pilots to maneuver and safely land a wingless vehicle designed to fly back to Earth from space and be landed like an aircraft at a pre-determined site.

Aerodynamic lift--essential to flight in the atmosphere--was obtained from the shape of their bodies. The addition of fins and control surfaces allowed the pilots to stabilize and control the vehicles and regulate their flight paths.

The information the lifting body program generated contributed to the data base that led to development of today's space shuttle program.

The success of the FRC's M2-F1 program led to NASA's development and construction of two heavyweight lifting bodies based on studies at NASA's Ames and Langley research centers--the M2-F2 and the HL-10, both built by the Northrop Corporation. The "M" refers to "manned" and "F" refers to "flight" version. "HL" comes from "horizontal landing" and 10 is for the tenth lifting body model to be investigated by Langley.

The first flight of the M2-F2--which looked much like the "F1"--was on July 12, 1966. Milt Thompson was the pilot. By then, the same B-52s used to air launch the famed X-15 rocket research aircraft were modified to also carry the lifting bodies. Thompson was dropped from the B-52's wing pylon mount at an altitude of 45,000 feet on that maiden glide flight.

The M2-F2 weighed 4,620 pounds, was 22 feet long, and had a width of about 10 feet.

On May 10, 1967, during the sixteenth glide flight leading up to powered flight, a landing accident severely damaged the vehicle and seriously injured the NASA pilot, Bruce Peterson.

NASA pilots and researchers realized the M2-F2 had lateral control problems, even though it had a stability augmentation (control) system. When the M2-F2 was rebuilt by the Northrop Corporation with the help and cooperation of the FRC and redesignated the M2-F3, it was modified with an additional third vertical fin--centered between the tip fins--to improve control characteristics.

The M2-F2/F3 was the first of the heavy-weight, entry-configuration (i.e., configured for re-entry to the atmosphere from space) lifting bodies. Its successful development as a research test vehicle answered many of the generic questions about these vehicles.

NASA donated the M2-F3 vehicle to the Smithsonian Institute in December 1973. It is currently hanging in the Air and Space Museum along with the X-15 aircraft number 1, which was its hangar partner at Dryden from 1965 to 1969.


NASA Photo by: NASA photo

Keywords:

Captain Jerry Gentry; Major Cecil Powell; National Aeronautics and Space Administration; M2-F3; High-Speed Flight Station; William H. Dana; John Manke; NASA Dryden Flight Research Center; Society of Experimental Test Pilots; X-24B; HL-10; X-24A; Lifting Bodies; NASA Ames-Dryden Flight Research Facility



Last Modified: October 9, 2002
Responsible NASA Official: Marty Curry
Curator: PAO Webmasters

NASA Website Privacy Statement