Skip Top nav bar link group topnav end piece go to business section go to education section go to history section go to gallery section go to news section go to organizations section go to research section go to search engine go to site index topnav end piece
NASA Meatball X-2 Aircraft  Photo Collection banner
 
X-2 Aircraft

X-2 Number 1 (#674) landing with skids deployed

 
Photo Number: ED06-0174-1
Photo Date: 1954/1956
 
Formats: 640x523 JPEG Image (162 KBytes)
1280x1045 JPEG Image (558 KBytes)
3000x2449 JPEG Image (2662 KBytes)
 
Photo
Description:
Bell Aircraft copy photo of X-2 Number 1 (#674) landing with skids deployed

X-2 Number 1 made its first unpowered glide flight on Aug. 5, 1954, and made a total of 17 (4 glide and 13 powered) flights before it was lost Sept. 27, 1956. The pilot on Flight 17, Capt. Milburn Apt, had flown the aircraft to a record speed of Mach 3.2 (2,094 mph), thus becoming the first person to exceed Mach 3.

 
Project
Description:
The X-2 was a swept-wing, rocket-powered aircraft designed to fly faster than Mach 3 (three times the speed of sound). It was built for the U.S. Air Force by the Bell Aircraft Company, Buffalo, New York.

The X-2 was flown to investigate the problems of aerodynamic heating as well as stability and control effectiveness at high altitudes and high speeds (in excess of Mach 3). Bell aircraft built two X-2 aircraft. These were constructed of K-monel (a copper and nickel alloy) for the fuselage and stainless steel for the swept wings and control surfaces. The aircraft had ejectable nose capsules instead of ejection seats because the development of ejection seats had not reached maturity at the time the X-2 was conceived. The X-2 ejection canopy was successfully tested using a German V-2 rocket. The X-2 used a skid-type landing gear to make room for more fuel. The airplane was air launched from a modified Boeing B-50 Superfortress Bomber.

X-2 Number 1 made its first unpowered glide flight on Aug. 5, 1954, and made a total of 17 (4 glide and 13 powered) flights before it was lost Sept. 27, 1956. The pilot on Flight 17, Capt. Milburn Apt, had flown the aircraft to a record speed of Mach 3.2 (2,094 mph), thus becoming the first person to exceed Mach 3. During that last flight, inertial coupling occurred and the pilot was killed. The aircraft suffered little damage in the crash, resulting in proposals (never implemented) from the Langley Memorial Aeronautical Laboratory, Hampton, Virginia, to rebuild it for use in a hypersonic (Mach 5+) test program.

In 1953, X-2 Number 2 was lost in an in-flight explosion while at the Bell Aircraft Company during captive flight trials and was jettisoned into Lake Ontario. The Air Force had previously flown the aircraft on three glide flights at Edwards Air Force Base, California, in 1952.

Although the NACA’s High-Speed Flight Station, Edwards, California, (predecessor of NASA’s Dryden Flight Research Center) never actually flew the X-2 aircraft, the NACA did support the program primarily through Langley Memorial Aeronautical Laboratory wind-tunnel tests and Wallops Island, Virginia, rocket-model tests. The NACA High-Speed Flight Station also provided stability-and-control recording instrumentation and simulator support for the Air Force flights. In the latter regard, the NACA worked with the Air Force in using a special computer to extrapolate and predict aircraft behavior from flight data.

 
NASA Photo by: Bell Aircraft Company
 
Keywords: X-2; V-2; B-50; Bell Aircraft Company; Jean Ziegler; NACA High-Speed Flight Station; NASA Dryden Flight Research Center; U. S. Air Force; Langley Memorial Aeronautical Laboratory; Wallops Island; Edwards Air Force Base; Captain Milburn Apt
 


Last Modified: September 21, 2006
Responsible NASA Official: Marty Curry
Curator: PAO Webmasters

NASA Website Privacy Statement