Skip Top nav bar link group topnav end piece go to business section go to education section go to history section go to gallery section go to news section go to organizations section go to research section go to search engine go to site index topnav end piece
NASA Meatball NASA Dryden M2-F3 Aircraft banner
M2-F3 Aircraft Photo Gallery Contact Sheet M2-F3 Aircraft Photo Gallery Contact Sheet

Photo Number: N/A
Photo Date:

Formats: Low Resolution Image Contact Sheet (34 KBytes)
Medium Resolution Image Contact Sheet (34 KBytes)
High Resolution Image Contact Sheet (34 KBytes)

Photo
Description:
These are the image contact sheets for each image resolution of the NASA Dryden M2-F3 Aircraft Photo Gallery.

Project
Description:

A fleet of lifting bodies flown at the NASA Flight Research Center (FRC--later the Dryden Flight Research Center), Edwards, California, from 1963 to 1975 demonstrated the ability of pilots to maneuver and safely land a wingless vehicle designed to fly back to Earth from space and be landed like an aircraft at a pre-determined site.

Aerodynamic lift--essential to flight in the atmosphere--was obtained from the shape of their bodies. The addition of fins and control surfaces allowed the pilots to stabilize and control the vehicles and regulate their flight paths.

The information the lifting body program generated contributed to the data base that led to development of today's space shuttle program.

The success of the FRC's M2-F1 program led to NASA's development and construction of two heavyweight lifting bodies based on studies at NASA's Ames and Langley research centers--the M2-F2 and the HL-10, both built by the Northrop Corporation. The "M" refers to "manned" and "F" refers to "flight" version. "HL" comes from "horizontal landing" and 10 is for the tenth lifting body model to be investigated by Langley.

The first flight of the M2-F2--which looked much like the "F1"--was on July 12, 1966. Milt Thompson was the pilot. By then, the same B-52s used to air launch the famed X-15 rocket research aircraft were modified to also carry the lifting bodies. Thompson was dropped from the B-52's wing pylon mount at an altitude of 45,000 feet on that maiden glide flight.

The M2-F2 weighed 4,620 pounds, was 22 feet long, and had a width of about 10 feet.

On May 10, 1967, during the sixteenth glide flight leading up to powered flight, a landing accident severely damaged the vehicle and seriously injured the NASA pilot, Bruce Peterson.

NASA pilots and researchers realized the M2-F2 had lateral control problems, even though it had a stability augmentation (control) system. When the M2-F2 was rebuilt by the Northrop Corporation with the help and cooperation of the FRC and redesignated the M2-F3, it was modified with an additional third vertical fin--centered between the tip fins--to improve control characteristics.

The M2-F2/F3 was the first of the heavy-weight, entry-configuration (i.e., configured for re-entry to the atmosphere from space) lifting bodies. Its successful development as a research test vehicle answered many of the generic questions about these vehicles.

NASA donated the M2-F3 vehicle to the Smithsonian Institute in December 1973. It is currently hanging in the Air and Space Museum along with the X-15 aircraft number 1, which was its hangar partner at Dryden from 1965 to 1969.

Pilots/Flights
  • Bill Dana - 4 glide flights,15 powered flights
  • Captain Jerry Gentry - 1 glide flight, 0 powered flights
  • John Manke - 0 glide flights, 4 powered flights
  • Major Cecil Powell - 0 glide flights, 3 powered flights

Keywords: M2-F3; heavy-weight lifting body; re-entry configuration; Bill Dana; M2-F2; side arm control stick; third vertical fin; Smithsonian Institute; Milt Thompson; Bruce Peterson; National Air and Space Museum


Last Modified: February 6, 2002
Responsible NASA Official: Marty Curry
Curator: PAO Webmasters

NASA Website Privacy Statement