|Dryden Home > Collections > Movie Home > STS-1 > Movie # EM-0084-05|
Shuttle landing at Edwards Air Force Base
|Formats||160x120 QuickTime Movie (1.3 MB)
320x240 QuickTime Movie (2.5 MB)
480x360 QuickTime Movie (3.7 MB)
640x480 QuickTime Movie (6.2 MB)
|Still photos of this aircraft are available in several resolutions at
This 34 second movie clip shows several shuttle landings on both the main runway at Edwards AFB and the lakebed made during 1992.
During 1977 the NASA Dryden Flight Research Center, Edwards, California, hosted the Approach and Landing Tests for the space shuttle prototype Enterprise. Since the shuttles would land initially on Rogers Dry Lakebed adjacent to Dryden on Edwards Air Force Base, NASA had already modified a Boeing 747 to carry them back to their launch site at Kennedy Space Center, Florida. Computer calculations and simulations had predicted the mated shuttle and 747 could fly together safely, but NASA wanted to verify that prediction in a controlled flight-test environment before the shuttles went into operation. The agency also wanted to glide test the orbiter to ensure it could land safely before sending it into space with human beings aboard.
NASA's Johnson Space Center, Houston, Texas, developed a three-phase test program. First, an unpiloted-captive phase tested the shuttle/747 combination without a crew on the Enterprise in case of a problem that required jettisoning the prototype. There were three taxi tests and five flight tests without a crew in the shuttle. That phase ended on March 2, 1977. The second or captive-active phase-completed on July 26, 1977, flew the orbiter mated to the 747 with a two-person crew inside. Finally there were five flights-completed on October 26, 1977, in which the orbiter separated from the Shuttle Carrier Aircraft (SCA, as the 747 was designated) and landed.
Beginning on August 12, 1977, the first four landings took place uneventfully on lakebed runways, but the fifth occurred on the concrete, 15,000-foot runway at Edwards. For the first three flights, a tail cone was placed around the dummy main engines to reduce buffeting. The tail-cone fairing was removed for the last two flights.
|Keywords||space shuttle; prototype; NASA; Dryden Flight Research Center; Edwards Air Force Base; Rogers Dry Lake; Shuttle;|